Phone: (800) 428-0040 | Email: sales-balloudama@wrcobb.com
Ballou-Dama | Pin & Scarf Findings
Select from a wide variety of pin findings, offered in brass and nickel silver. Select from joints, catches, pin stems, pinbacks, and more.
Contact Us
Download Catalogs
Need a quote on pin findings? Click on the button below and a new tab will open which will contain a quote request form; add the chain components that you would like quoted to this form and submit.
Joints
40-43
Nickel Silver Ball Joint with Ring
Use with 40 Rivet
40-46
Nickel Silver Ball Joint with Ring
Use with Rivet 41
40-946
Nickel Silver Ball Joint with Ring
Fusion
Use with Rivet 41
40-F079405
Nickel Silver Joint
Fusion
40-F791017
Nickel Silver Ball Joint
40-99
Nickel Silver Ball Joint
Use with 98 series pinstem
40-999
Nickel Silver Ball Joint
Fusion
Use with 98 series pinstem
40-100/B
Nickel Silver Joint
Large Base for Soldering
Options: brass (70-40-100/B)
40-9100
Nickel Silver NIB Joint
Fusion
Use with 100 series pinstem
40-141/B
Nickel Silver Ball Joint
Large base for soldering
40-101/B
Nickel Silver Ball Joint
Large Base for soldering
40-142/B
Nickel Silver Joint
Large Base for Soldering
Options: brass (70-40-142/B)
40-105
Nickel Silver Flat Joint
Use with rivet
40-9105
Nickel Silver Flat Joint
Use with Rivet & 105 series pinstem
Fusion
40-941
Nickel Silver Ball Joint
Use with Rivet & 41 series pinstem
Fusion
Pin Stems
57-101
Nickel Silver Pin Stem with Attached Rivet
Use with 101 or 142 joint series, 45, 90 or 995 catch series
Pin Stem Diameter: .040″/1.0mm
Length Options: 2.25″/57.2mm (57-101/225), 2.5″/63.5mm (57-101/250), 2.75″/69.9mm (57-101/275), 2.875″/73mm (57-101/287), 3.00″/76.2mm (57-101/300)
57-100
Nickel Silver Pin Stem with Attached Rivet
Use with 100 or 141 joint series, 39, 40 or 90 catch series
Pin Stem Diameter: .036″/.9mm
Material Options: Phospher Bronze
Length Options: .75″/19.1mm (57-100/75), 1.0″/25.4mm (57-100/100), 1.125″/28.6mm (57-100/112), 1.25″/31.8mm (57-100/125), 1.5″/38.1mm (57-100/150), 1.625″/41.3mm (57-100/162), 1.75″/44.5mm (57-100/175), 2.0″/50.8mm (57-100/200)
57-98
Nickel Silver Pin Stem with Attached Rivet
Use with 98 joint series, 40 catch series
Pin Stem Diameter: .032″/.08mm
Length Options: .375″/9.5mm (57-98/37), .500″/12.7mm (57-98/50), .625″/15.9mm (57-98/62), .750″/19.1mm (57-98/75)
57-105
Nickel Silver Pin Stem
Use with 105 or 9105 joint series, 105 Pin/68 or 968 series catch
Pin Stem Diameter: .072″/1.83mm
Length Options: 1.5″/38.1mm (57-105/150), 1.625″/41.275mm (57-F810513), 1.75″/44.5mm (57-105/175), 1.78″/45.212mm (57-F810525), 2.0″/50.8mm (57-105/212), 2.25″/57.2mm (57-105/225), 2.5″/63.5mm (57-105/250), 2.75″/69.8mm (57-F810562)
57-F0955030
Nickel Silver Pin Stem
57-41
Nickel Silver Swaged Pin Stem w/Bearing
Use with 41 or 41B Joint Series, 41 Rivet and 39, 40 or 45 Catch
Slide Slot Catch Recommended
Pin Stem Diameter: .032″
Options: .75″/19.9mm (57-41/75), 1.00″/25.4mm (57-41/100), 1.25″/31.8mm (57-41/125), 1.625″/41.3mm (57-F841504)
Pin Backs
59-150/05
Nickel Silver Pin Back with Straight Bar
.050″/1.3mm Top Slot with Hole
Top Opening Rotor
Pin Back Length: .050″/12.7mm
59-153/03
Nickel Silver Pin Back Top Slot with Pad
Bar Width: .050″/1.3mm
59-160
Nickel Silver Pin Back
Bar Width: .155″/4mm Side Slot
Length Options:
1.0″/25.4mm – Fixing Holes .460″/11.7mm (59-160/10)
1.25″/31.8mm – Fixing Holes .700″/18mm (59-160/12)
1.50″/38.1mm – Fixing Holes .96″/24mm (59-160/15)
2.0″/50.8mm – Fixing Holes 1.437″/36.5mm (59-160/20)
59-170/15
Nickel Silver Pin Back
Bar Width: .150″/38.1mm Side Slot
Fixing Holes .820″/21mm
59-183/20
Nickel Silver Pin Back with Straight Bar
.195″/5mm Bar Width
Side Opening Rotor
59-7164/17
Nickel Silver Pin Back
59-9163/07
Nickel Silver Pin Back
Fusion
Center Protrusion w/ Fusion Nib
Slot at Side 3/4″ Length
Bar Width: .155″/4mm
Safety Catches
65-939
Nickel Silver Side Opening Catch
Fusion
Use with 100 Series Pin Stem
65-39/BL
Nickel Silver Small Side Opening Bullet Safety Catch
Soft Solder
Not for Hot Nickel
Large Base for Soldering
65-45/BL
Nickel Silver Small Side Opening Bullet Safety Catch
Soft Solder
Large Base for Soldering
Loose Rotor for Plating
Options: Brass (65-45/BL)
65-90
Nickel Silver Small Side Catch
Hard Solder
Not for Hot Nickel
Options: Brass (65-90)
65-90/L
Nickel Silver Side Opening Catch
Soft Solder
Not for Hot Nickel
Loose Rotor for Plating
Options: Brass (65-90/L)
65-93L
Brass Side Opening Catch
Soft Solder
Hot Nickel
Loose rotor for plating
65-98/BL
Nickel Silver Side Opening Bullet Safety Catch
Soft Solder
Hot Nickel
Large Base for Soldering
Loose Rotor for Plating
Options: Brass (70-65-90/BL)
65-50
Nickel Silver Top Opening Catch
Flat Solder
Hard Solder
Not for Hot Nickel
65-55
Nickel Silver Top Opening Catch
Fusion
Flat Sided
Hard Solder
Not for Hot Nickel
65-950
Nickel Silver Top Opening Catch
Fusion
Flat Sided
Use with 98 or 99 Series Pin Stem
65-40
Nickel Silver Top Opening Catch
Flat Sided
Hard Solder
Not for Hot Nickel
65-940
Nickel Silver Top Opening Catch
Fusion
Flat Sided
Use with 41 or 53 Series Pin Stem
65-995
Nickel Silver Top Opening Catch
Fusion
Flat Sided
65-995L
Nickel Silver Top Opening Catch
Fusion
Flat Sided
65-61
Nickel Silver Large Top Opening Catch
Hard Solder
Not for Hot Nickel
65-65
Nickel Silver Top Opening Catch
Fusion
65-68
Nickel Silver Top Opening Catch
Hard Solder
Not for Hot Nickel
65-968
Nickel Silver Top Opening Catch
Use with 105 Series Pin Stem
65-105/P
Brass Escusheon Pin
Scarf Stems & Clutches
67-604
Nickel Silver Scarf Stem
Pin Stem Diameter: .036″
Pin Stem Length: 2″
67-607/150
Nickel Silver Scarf Stem
Looped Flattened End
Pin Stem Diameter: .036″
Pin Stem Length: 2″
18-32
Nickel Plated Brass Protector w/Open End
Recommended Wire Diameter: .036″-.042″
Length: .372″/9.5mm
Options: Brass (70-18-32), Gold Plated (83-18-32)
18-732
Gold Plated Brass Protector w/Closed End
Recommended Wire Diameter: .036″-.042″
Length: .372″/9.5mm
Options: Brass (70-18-732), Nickel Plated (85-18-32)
Let's Stay In Touch
Share your email address with us so we can keep you up-to-date on featured products, company news, and more.